RelProperties of Relations

This short (and optional) chapter develops some basic definitions and a few theorems about binary relations in Coq. The key definitions are repeated where they are actually used (in the Smallstep chapter of Programming Language Foundations), so readers who are already comfortable with these ideas can safely skim or skip this chapter. However, relations are also a good source of exercises for developing facility with Coq's basic reasoning facilities, so it may be useful to look at this material just after the IndProp chapter.

Set Warnings "-notation-overridden,-parsing,-deprecated-hint-without-locality".
From LF Require Export IndProp.

Relations

A binary relation on a set X is a family of propositions parameterized by two elements of X -- i.e., a proposition about pairs of elements of X.

Definition relation (X: Type) := X → X → Prop.

Somewhat confusingly, the Coq standard library hijacks the generic term "relation" for this specific instance of the idea. To maintain consistency with the library, we will do the same. So, henceforth, the Coq identifier relation will always refer to a binary relation on some set (between the set and itself), whereas in ordinary mathematical English the word "relation" can refer either to this specific concept or the more general concept of a relation between any number of possibly different sets. The context of the discussion should always make clear which is meant.

An example relation on nat is le, the less-than-or-equal-to relation, which we usually write n₁ ≤ n₂.

Print le.
(* ====> Inductive le (n : nat) : nat -> Prop :=
le_n : n <= n
| le_S : forall m : nat, n <= m -> n <= S m *)
Check le : nat → nat → Prop.
Check le : relation nat.

(Why did we write it this way instead of starting with Inductive le : relation nat...? Because we wanted to put the first nat to the left of the :, which makes Coq generate a somewhat nicer induction principle for reasoning about ≤.)

Basic Properties

As anyone knows who has taken an undergraduate discrete math course, there is a lot to be said about relations in general, including ways of classifying relations (as reflexive, transitive, etc.), theorems that can be proved generically about certain sorts of relations, constructions that build one relation from another, etc. For example...

Partial Functions

A relation R on a set X is a partial function if, for every x, there is at most one y such that R x y -- i.e., R x y₁ and R x y₂ together imply y₁ = y₂.

Definition partial_function {X: Type} (R: relation X) :=
∀ x y₁ y₂ : X, R x y₁ → R x y₂ → y₁ = y₂.

For example, the next_nat relation is a partial function.

Inductive next_nat : nat → nat → Prop :=
| nn n : next_nat n (S n).

Check next_nat : relation nat.

Theorem next_nat_partial_function :
partial_function next_nat.

Proof.
  unfold partial_function.
  intros x y₁ y₂ H₁ H₂.
  inversion H₁. inversion H₂.
  reflexivity. Qed.

However, the ≤ relation on numbers is not a partial function. (Assume, for a contradiction, that ≤ is a partial function. But then, since 0 ≤ 0 and 0 ≤ 1, it follows that 0 = 1. This is nonsense, so our assumption was contradictory.)

Theorem le_not_a_partial_function :
¬ (partial_function le ).

Proof.
  unfold not. unfold partial_function. intros Hc.
  assert (0 = 1) as Nonsense. {
    apply Hc with (x := 0).
    - apply le_n.
    - apply le_S. apply le_n. }
  discriminate Nonsense. Qed.

Exercise: 2 stars, standard, optional (total_relation_not_partial_function)

Show that the total_relation defined in (an exercise in) IndProp is not a partial function.

Copy the definition of total_relation from your IndProp here so that this file can be graded on its own.

Inductive total_relation : nat → nat → Prop :=
(* FILL IN HERE *)
.

Theorem total_relation_not_partial_function :
¬ (partial_function total_relation ).
Proof.
(* FILL IN HERE *) Admitted.
☐

Exercise: 2 stars, standard, optional (empty_relation_partial_function)

Show that the empty_relation defined in (an exercise in) IndProp is a partial function.

Copy the definition of empty_relation from your IndProp here so that this file can be graded on its own.

Inductive empty_relation : nat → nat → Prop :=
(* FILL IN HERE *)
.

Theorem empty_relation_partial_function :
partial_function empty_relation.
Proof.
(* FILL IN HERE *) Admitted.
☐

Reflexive Relations

A reflexive relation on a set X is one for which every element of X is related to itself.

Definition reflexive {X: Type} (R: relation X) :=
∀ a : X, R a a.

Theorem le_reflexive :
reflexive le.

Proof.
unfold reflexive. intros n. apply le_n. Qed.

Transitive Relations

A relation R is transitive if R a c holds whenever R a b and R b c do.

Definition transitive {X: Type} (R: relation X) :=
∀ a b c : X, (R a b ) → (R b c ) → (R a c ).

Theorem le_trans :
transitive le.

Proof.
  intros n m o Hnm Hmo.
  induction Hmo.
  - (* le_n *) apply Hnm.
  - (* le_S *) apply le_S. apply IHHmo. Qed.

Theorem lt_trans:
transitive lt.

Proof.
  unfold lt. unfold transitive.
  intros n m o Hnm Hmo.
  apply le_S in Hnm.
  apply le_trans with (a := (S n)) (b := (S m)) (c := o).
  apply Hnm.
  apply Hmo. Qed.

Exercise: 2 stars, standard, optional (le_trans_hard_way)

We can also prove lt_trans more laboriously by induction, without using le_trans. Do this.

Theorem lt_trans' :
  transitive lt.
Proof.
  (* Prove this by induction on evidence that m is less than o. *)
  unfold lt. unfold transitive.
  intros n m o Hnm Hmo.
  induction Hmo as [| m' Hm'o].
    (* FILL IN HERE *) Admitted.
☐

Exercise: 2 stars, standard, optional (lt_trans'')

Prove the same thing again by induction on o.

Theorem lt_trans'' :
transitive lt.

Proof.
  unfold lt. unfold transitive.
  intros n m o Hnm Hmo.
  induction o as [| o'].
  (* FILL IN HERE *) Admitted.

☐

The transitivity of le, in turn, can be used to prove some facts that will be useful later (e.g., for the proof of antisymmetry below)...

Theorem le_Sn_le : ∀ n m, S n ≤ m → n ≤ m.

Proof.
  intros n m H. apply le_trans with (S n).
  - apply le_S. apply le_n.
  - apply H.
Qed.

Exercise: 1 star, standard, optional (le_S_n)

Theorem le_S_n : ∀ n m,
(S n ≤ S m ) → (n ≤ m ).
Proof.
(* FILL IN HERE *) Admitted.
☐

Exercise: 2 stars, standard, optional (le_Sn_n_inf)

Provide an informal proof of the following theorem:

Theorem: For every n, ¬ (S n ≤ n)

A formal proof of this is an optional exercise below, but try writing an informal proof without doing the formal proof first.

Proof:

(* FILL IN HERE *)
☐

Exercise: 1 star, standard, optional (le_Sn_n)

Theorem le_Sn_n : ∀ n,
¬ (S n ≤ n ).
Proof.
(* FILL IN HERE *) Admitted.
☐

Reflexivity and transitivity are the main concepts we'll need for later chapters, but, for a bit of additional practice working with relations in Coq, let's look at a few other common ones...

Symmetric and Antisymmetric Relations

A relation R is symmetric if R a b implies R b a.

Definition symmetric {X: Type} (R: relation X) :=
∀ a b : X, (R a b ) → (R b a ).

Exercise: 2 stars, standard, optional (le_not_symmetric)

Theorem le_not_symmetric :
¬ (symmetric le ).
Proof.
(* FILL IN HERE *) Admitted.
☐

A relation R is antisymmetric if R a b and R b a together imply a = b -- that is, if the only "cycles" in R are trivial ones.

Definition antisymmetric {X: Type} (R: relation X) :=
∀ a b : X, (R a b ) → (R b a ) → a = b.

Exercise: 2 stars, standard, optional (le_antisymmetric)

Theorem le_antisymmetric :
antisymmetric le.
Proof.
(* FILL IN HERE *) Admitted.
☐

Exercise: 2 stars, standard, optional (le_step)

Theorem le_step : ∀ n m p,
  n < m →
  m ≤ S p →
  n ≤ p.
Proof.
  (* FILL IN HERE *) Admitted.
☐

Equivalence Relations

A relation is an equivalence if it's reflexive, symmetric, and transitive.

Definition equivalence {X:Type} (R: relation X) :=
(reflexive R ) ∧ (symmetric R ) ∧ (transitive R ).

Partial Orders and Preorders

A relation is a partial order when it's reflexive, anti-symmetric, and transitive. In the Coq standard library it's called just "order" for short.

Definition order {X:Type} (R: relation X) :=
(reflexive R ) ∧ (antisymmetric R ) ∧ (transitive R ).

A preorder is almost like a partial order, but doesn't have to be antisymmetric.

Definition preorder {X:Type} (R: relation X) :=
(reflexive R ) ∧ (transitive R ).

Theorem le_order :
order le.

Proof.
  unfold order. split.
    - (* refl *) apply le_reflexive.
    - split.
      + (* antisym *) apply le_antisymmetric.
      + (* transitive. *) apply le_trans. Qed.

Reflexive, Transitive Closure

The reflexive, transitive closure of a relation R is the smallest relation that contains R and that is both reflexive and transitive. Formally, it is defined like this in the Relations module of the Coq standard library:

Inductive clos_refl_trans {A: Type} (R: relation A) : relation A :=
  | rt_step x y (H : R x y) : clos_refl_trans R x y
  | rt_refl x : clos_refl_trans R x x
  | rt_trans x y z
        (Hxy : clos_refl_trans R x y)
        (Hyz : clos_refl_trans R y z) :
        clos_refl_trans R x z.

For example, the reflexive and transitive closure of the next_nat relation coincides with the le relation.

Theorem next_nat_closure_is_le : ∀ n m,
(n ≤ m ) ↔ ((clos_refl_trans next_nat) n m ).

Proof.
  intros n m. split.
  - (* -> *)
    intro H. induction H.
    + (* le_n *) apply rt_refl.
    + (* le_S *)
      apply rt_trans with m. apply IHle. apply rt_step.
      apply nn.
  - (* <- *)
    intro H. induction H.
    + (* rt_step *) inversion H. apply le_S. apply le_n.
    + (* rt_refl *) apply le_n.
    + (* rt_trans *)
      apply le_trans with y.
      apply IHclos_refl_trans1.
      apply IHclos_refl_trans2. Qed.

The above definition of reflexive, transitive closure is natural: it says, explicitly, that the reflexive and transitive closure of R is the least relation that includes R and that is closed under rules of reflexivity and transitivity. But it turns out that this definition is not very convenient for doing proofs, since the "nondeterminism" of the rt_trans rule can sometimes lead to tricky inductions. Here is a more useful definition:

Inductive clos_refl_trans_1n {A : Type}
                             (R : relation A) (x : A)
                             : A → Prop :=
  | rt1n_refl : clos_refl_trans_1n R x x
  | rt1n_trans (y z : A)
      (Hxy : R x y) (Hrest : clos_refl_trans_1n R y z) :
      clos_refl_trans_1n R x z.

Our new definition of reflexive, transitive closure "bundles" the rt_step and rt_trans rules into the single rule step. The left-hand premise of this step is a single use of R, leading to a much simpler induction principle.

Before we go on, we should check that the two definitions do indeed define the same relation...

First, we prove two lemmas showing that clos_refl_trans_1n mimics the behavior of the two "missing" clos_refl_trans constructors.

Lemma rsc_R : ∀ (X:Type) (R:relation X) (x y : X),
R x y → clos_refl_trans_1n R x y.

Proof.
intros X R x y H.
apply rt1n_trans with y. apply H. apply rt1n_refl. Qed.

Then we use these facts to prove that the two definitions of reflexive, transitive closure do indeed define the same relation.

Exercise: 3 stars, standard, optional (rtc_rsc_coincide)

Theorem rtc_rsc_coincide :
  ∀ (X:Type) (R: relation X) (x y : X),
    clos_refl_trans R x y ↔ clos_refl_trans_1n R x y.
Proof.
  (* FILL IN HERE *) Admitted.
☐

(* 2024-08-08 11:26 *)